Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


4-Jaw Chuck Hold-down Set, P/N 3009

P/N NAME WT. PRICE
3058 4-Jaw Hold-down Set .15 lb. $5.00

About the 4-Jaw Chuck Hold-down Set...

This set consists of two clamps complete with screws and T-nuts and can be used to clamp the 4-jaw chuck to the milling table or lathe crosslide. The set provides a little more versatility than the chuck-to-T-slot adapter (P/N 1187) in that the chuck can be located almost anywhere on the table, and the part can be properly aligned with the axis of the machine. The clamps fit in a groove machined around the circumference of the 4-jaw chuck. They are the same as those furnished with the Sherline milling vise (P/N 3551), so they are not needed if you already own a vise.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |