Mill XYZ Bases

P/N 5201 (5211)--5000-series (10" base)

P/N 5230 (5235)--5000-series w/ adj. handwheels

P/N 5420 (5430)--Deluxe 5400-series (12" base)

P/N 5625 (5630)--2000-series 8-direction (14" base)

(Metric version part number given in parenthesis after inch part number)

P/N	NAME	WT.	PRICE
5201 (5211)	Mill XYZ base (5000-series)	26 lb.	$315.00
5230 (5235)	Mill XYZ base (5000-series w/ adjustable handwheels)	26 lb.	$410.00
5420 (5425)	Deluxe Mill XYZ base (5400- series)	27 lb.	$445.00
5625 (5630)	14" Base from 2000-series 8-direction mill	34 lb.	$700.00

About the Mill XYZ base...

The Sherline vertical mill can be purchased without the headstock and motor/speed control. This allows lathe owners to swap the headstock and motor/speed control from their lathe to the mill in approximately 60 seconds. This package offers a savings of about 30% when compared to the price of our standard mill, and 10% compared to the cost of a vertical milling column and XY base.

Part numbers and travels of the available XYZ bases are as follows:

P/N 5201 (Inch) or 5211 (Metric)Standard 10" XYZ base from model 5000/5100 mill. Travel: X=9.0" (228mm), Y= 3.0" (76mm), Z=6.25" (159mm)

P/N 5230 (Inch) or 5235 (Metric)Standard 10" XYZ base from model 5500/5510 mill with adjustable "zero" handwheels (Same travels as 5201 above)

P/N 5420 (Inch) or 5430 (Metric)12" deluxe XYZ base with adjustable "zero¨ handwheels and laser engraved table and base from model 5400/5410 deluxe mill. Travel: X=9.0" (228mm), Y= 5.0" (127mm), Z=6.25" (159mm)

P/N 5625 (Inch) or 5630 (Metric)14" XYZ base with 8-direction capability from the model 2000/2010 8-direction mill. Travel: X=9.0" (228mm), Y=7.0" (178mm), Z=5.38" (137mm)

RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page