Back to my Clock, Watch and Lathe Courses
| P/N | NAME | WT. | PRICE |
| 7600 | 3/8" Insert Tool Post | .25 lb. | $20.00 |
Your standard 1/4" Sherline tool post may be modified to accept these special 3/8" shank tool holders, but an easier solution is Sherline's special tool post. It is designed to fit the larger 3/8" square and 3/8" round tool holders commonly used for carbide or diamond inserted tips. It will also hold Sherline's own P/N 2256 (RH) and 2257 (LH) 35° inserted tip tool holders. It is machined from solid aluminum and has a black anodized finish. Purchase of this tool post will allow you to keep your standard tool post available for use with 1/4" high-speed steel tools for jobs where they are sufficient and/or a specially ground and shaped tip is required.
NOTE: Carbide inserts and inserted tip tools are available through Sherline. See our page on carbide tools.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |