2000/2010 Deluxe 8-direction Milling Machine

The deluxe 8-direction milling machine offers the most versatility of any Sherline mill. In addition to X-axis, Y-axis and Z-axis travels, there are five additional directions that the headstock spindle can be positioned to do drilling or milling on your part from virtually any angle. The headstock can pivot up to 90° in either direction. The column bed can be rotated side-to-side up to 90° in either direction for angled drilling. A special knuckle allows the column to be pivoted front to rear. The "ram" design of the column base also allows the entire ram to be pivoted up to 90° side-to-side. Loosening the column cap allows the ram to be moved in and out with over 5.5" of travel.

With this many directions of movement, the machining possibilities are virtually limitless withing the size capabilities of the machine. The 14" long base also increases Y-axis travel by an additional 2" compared to the Model 5400 mill. This is the mill for those who want to take their miniature machining abilities to the extremes.

READ INSTRUCTIONS FOR USING THE MODEL 2000 MILL

Sherline List Price: $995.00

RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |